https://www.bearingroller.com/products
The good operating condition of the equipment is the guarantee of safe production. Equipment has a life cycle just like a person, and it also needs to be inspected, maintained, and cared for. The operator of each device is the owner of the device, and cares for the device as much as caring for his family. Only if each operator carefully maintains it according to the equipment maintenance requirements, the equipment can operate healthily.
Production equipment is a good helper for our work. Correct and systematic maintenance equipment can not only guarantee the use time of equipment, but also greatly improve the safety factor and efficiency of our work. Whether the production equipment can operate well in its life cycle, except for reasonable use, depends to a large extent on the maintenance of the equipment. If our maintenance work is done solidly, we can reduce the number of repairs and workload and improve our production efficiency.
1. Daily maintenance
The operator must carry out maintenance within the specified bearing maintenance cycle. The working cycle of the bearing has different calculation methods, which are calculated according to the number of kilometers in the working time. During the maintenance period, the large load should be shortened appropriately, and the small load should be extended appropriately. It depends on the use of the bearing on site.
2. Protection and maintenance
According to the internal structure of the bearing, the running speed, the running load, the bearing material and the working principle of the mechanical equipment, the lubricating grease should be selected reasonably to prevent leakage, oil leakage and water leakage to ensure the normal operation of the mechanical equipment for a long period.
3. Problem handling
If there is a problem with the bearing, the maintenance personnel should clean it properly. After removing the bearing, first remove the dirty oil from the bearing, then use gasoline or cleaning agent to soak the inner ring, outer ring, roller (bead) and raceway of the bearing. Rinse, brush with a brush, dry and then grease. When applying grease, squeeze with the palm of your hand. Finally, apply a layer on the outside of the bearing.
4. Bearing management ledger
Bearing management account is an important basis for bearing use, management and maintenance. In order to ensure the quality of bearing maintenance work, the bearing is in a good technical state, improve the level of use and maintenance, and give full play to the normal operation of the bearing without affecting the normal operation of the equipment. Productivity. The after-sales maintenance rate of the bearing is reduced, and the accurate cycle of the operation of the bearing in each device is improved.
The equipment maintenance work in autumn and winter should be highly valued; carefully check the equipment for safety hazards from the details; ensure the normal operation of all equipment and achieve refined management of equipment; employees should change their ideas, conscientiously do their jobs, and strengthen equipment. Standardize maintenance and create a harmonious working environment.