WBM is a professional provider of bearing cold heading dies, taper rollers, grinding tools and detection equipment and comprehensive service of consultation/trading in supply chain of the bearing industry. As a grade 100 carbon ball, a kind of carbon steel ball, factory, WBM is professional.
Here are Grade 100 Carbon Ball Descriptions:
Material | AISI1010/AISI1015/AISI1085 |
Diameter | 0.8mm-50.8mm |
Grade | G100-G1000 |
Application | Low carbon steel ball: Furniture rails and rollers, drawers and rolling bearings, locks, oilers and greasers, skates, caddies, toys, belt and roller conveyors, tumble finishing.Low carbon steel ball (soft unhardened): Caddies, wrought iron work, curtain mechanisms, steel shots, munitions, stirrers and mixers in not aggressive environments, welding appliances.High carbon steel ball: Low precision bearings, furniture bearings, bicycle and automotive components, agitators, sliding rails, drawer rails, skates, roller conveyors, castors, locks, bearing units, polishing and milling machines. |
AISI420 Stainless Steel Ball is a martensitic stainless steel ball with 12% Chromium which is sufficient to give good corrosive resistance properties of stainless steel cleaning ball.It’s best corrosive resistance is when hardened and surface is ground or polished. It has good ductility in the annealed condition but can be hardened up to 500HB (highest of the chromium grades) due to its excellent harden-ability, 440c stainless steel ball for pen.steel ball for cartridges.It is capable of getting hardened up to 50 HRC Rockwell or higher. 420c 440c stainless steel ball g10 g1000.Martensitic Grades are known for high hardness and allowances must be made for poor weld ability and usually allowances for a final harden and temper treatment. 420 steel is magnetic and welding is not recommended. Material will not pass the 72 hours salt bath test.
Carbon steel mainly includes low carbon steel (AISI1010/1015), medium carbon steel (AISI1045) and high carbon steel (AISI1085). In the precision steel ball industry, low carbon steel balls and high carbon steel balls are commonly used. Low-carbon steel balls are also called soft steel balls, which have low strength, low hardness and softness, and are suitable for processing such as drilling and tapping; high-carbon steel balls, also known as hard steel balls, have higher strength and hardness, high elastic limit and fatigue limit (especially notch fatigue limit), suitable for applications with high hardness requirements and low wear.
Welcome to get quotation from WBM factory.
https://www.bearingroller.com/rolling-elements/steel-ball/carbon-2steel-ball.html